Quick Detail:

Heat Exchanger stainless steel seamless tube bright annealed precision rolling

Surface: bright and shining

Base on excellente quality, satisfactory service and reasonable price, our products have exported to USA, Russia, Korea, Brazil, Chile, Peru and MId East, more than 20 countries.
 

1 Standard: ASTM A213/ASME SA213

2 Material: TP304,TP316L,TP310,TP347

3 OD:6mm-101.6mm

  Thickness: 0.6mm-8mm

4 Certificate: PED, GOST, ISO

Heat Exchanger 304 / 316 / 310 Stainless Steel Seamless Tube ASTM A213 / ASME SA213

SIZE RANGE :

MAIN STEEL TYPE AND GRADE :

MAIN PRODUCTION STANDARDS:

Stainless Steel Seamless Pipe:

1.A999/A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the pipe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
2. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8” TO AND INCLUDING nps 8 are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
3. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the less than the permitted in Section 9 of Specification A999/A999M
4. Butt Weld End: According to ANSI B 16.25
5. Pipe Marking: Specified in A999/999M, include “Logo+Standard+SIZE+Heat No.+Lot No.+H.T/E.T/U.T”
6. Packing: Each Pipe end is protected by Plastic cap. Then packed by Anti-rust steel strip, The outside of the bundle is plastic woven bag, or Plastic film.
7. Packing Mark: SIZE + STEEL GRADE+ QTY OF PIECE/WEIGHT/METRE.
8.MTC: BWSS Official Original MTC paper will be supplied for each order.

PACKING:

Stainless Steel Seamless/Welded Pipe/Tubes

ASTM/ASME Standards
ASTM A 213/A 213M ASME SA213/SA213M Specification for Seamless Ferric and Austenitic Alloy-Steel Boiler, Su[perheater, and Heat-Exchanger Tubes
ASTM A 249/A 249M Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser tubes
ASTM A268/A268M, ASME SA268/SA268M Specification Seamless and welded ferritic and martensitic stainless steel tubing for general service
ASTM A269/A269M, ASME SA269/SA269M Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
ASTM A 270 Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
ASTM A312/A312M, ASME SA312/SA312M Specification for Seamless and Welded Austenitic Stainless Steel Pipes
ASTM A 358/A 358M Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service
ASTM A376/A376M, ASME SA376/SA376M Seamless austenitic steel pipes for high-temperature central-station service
ASTM A409/SA409 Welded Large Diameter Austenitic Steel Pipe for Corrosive or High Temperature Service
ASTM A 450/A 450M Specificaion for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
ASTM A 511 Specification for Seamless Stainless Steel Mechanical Tubing
ASTM A 530/ A 530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
ASTM A 554 Specification for Welded Stainless Steel Mechanical Tubing
ASTM A 688 / SA 688 For Welded feed water heater ‘U’ Tubes
ASTM A731 / A731M Seamless and Welded Ferritic and Martensitic Stainless Steel Pipe
ASTM A 778 Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
ASTM A789/A789M, ASME SA789/SA789M Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
ASTM A790